TD95 is a high performance TODI type TPU，supplied in form of opaque，colorless granules. It possesses extremely high mechanical properties, outstanding resistance to abrasion and tear over a large range of temperature(-53℃–149℃), excellent resistance to oil.
TYPICAL PHYSICAL PROPERTIES
|Property||Test Method||Typical Values#|
|Density@20℃||ISO 2781||1.18 g/cm3|
|Shore Hardness||ISO 868||94 A|
|Tensile strength||ISO 527||59.49 MPa|
|Elongation @ Break||ISO 527||462.00 %|
|Modulus @ 100% Elongation||ISO 527||10.77 MPa|
|Modulus @ 300% Elongation||ISO 527||20.98 MPa|
|Tear Strength||ISO 34-1B||163.80 KN/m|
|Compression set (70h @100℃)||ASTM D395B||47%|
|Rebound Resilience||ISO4662||40 %|
INJECTION MOLDING PARAMETERS;
For optimum results，previous drying of the product during 4-5 hours at 100-110℃ is advisable，in a hot air circulatory，vacuum or desiccant-air dryer.
Recommended maximum hold up time: 8-10min
Recommended mold temperature: 40℃
Pressure and other data
Recommended back pressure： as low as possible
Recommended Maximum screw rotation: 50rpm
TD95 is packaged in heat-sealed, moisture proof PE bags of 25 kg net weight.
TD95 should be kept in a cool( 15-25℃) and dry environment prior to being processed.